DOT-4
DOT-4
Active Offers
Free Product
Microfiber cloth
Order Above Rs 1000/-
Prepaid Offers
Get 10% OFF
On all prepaid offer
Buy 1 Product
Get Free
Polish & Shampoo
Couldn't load pickup availability

Authentic
above 500/-
Returns
Checkout
Share

Palco Dot 4 is a premium synthetic brake fluid developed to deliver dependable braking performance in modern vehicles.
Its advanced formulation provides high thermal and chemical stability, helping the brake fluid perform effectively under demanding operating temperatures.
The product offers high dry and wet ERBP, which supports better resistance against vapour lock during service life. Vapour lock can reduce braking efficiency, especially when brake systems
operate under heat and pressure. Palco Dot 4 helps maintain a higher vapour lock point compared to conventional glycol ether-based fluids.
This brake fluid also helps protect hydraulic systems from rust and corrosion. Its balanced additive technology supports long-term brake system cleanliness, better fluid stability, and reliable operation in different driving conditions.
Palco Dot 4 is suitable for users looking for Palco Dot 4 brake fluid, synthetic brake fluid, hydraulic brake fluid, clutch fluid, high boiling brake fluid, or brake fluid for cars, trucks, buses, tractors, and heavy equipment.
1.Refer to the vehicle owner’s manual before selecting brake fluid.
2.Make sure Dot 4 brake fluid is recommended for the vehicle’s hydraulic brake or clutch system.
3.Clean the brake fluid reservoir cap area before opening to avoid contamination.
4.Open the reservoir carefully and fill Palco Dot 4 up to the recommended level.
5.Dot not overfill the reservoir.
6.Avoid mixing with unknown, old, or contaminated brake fluids.
7. After filling, close the cap tightly.
8. Bleed the brake system if required as per service procedure.
9. Check for leaks and proper brake response after service.
For best results, brake fluid replacement should be done by a trained mechanic or service professional. Always follow the manufacturer’s recommended brake fluid change interval
•High boiling synthetic Dot 4 brake fluid
•Provides high thermal and chemical stability
•High dry and wet ERBP for reliable braking performance
•Helps resist moisture-related vapour lock brake failure
•Protects brake system components from rust and corrosion
•Very good low-temperature fluidity
•Suitable for hydraulic brake and clutch systems
•Supports performance under moderate to severe duty conditions
•Designed for modern passenger cars and commercial vehicles
•Suitable for trucks, buses, tractors, and heavy earth moving equipment
•Meets SAE J 1703, FMVSS No. 116 DOT-4, ISO 4925 Class 4, and IS 8654-2019 Type 1 specifications
Palco Dot 4 is recommended for hydraulic brake and clutch systems where Dot 4 brake fluid is specified by the vehicle manufacturer.
It can be used for:
• Passenger cars and modern fuel-efficient vehicles
• Hydraulic brake systems
• Hydraulic clutch systems
• Trucks, buses, and commercial vehicles
• Tractors and agricultural vehicles
• Heavy earth moving equipment
• Vehicles operating under moderate to severe duty conditions
• Brake fluid top-up and replacement service
• Garages, workshops, and automobile service centres
This product is ideal for users looking for Dot 4 brake fluid, synthetic brake fluid, hydraulic brake fluid, high boiling brake fluid, car brake fluid, clutch fluid, or brake fluid for commercial vehicles
• Keep out of reach of children.
• Avoid contact with skin and eyes.
• In case of eye contact, rinse immediately with clean water.
• In case of skin contact, wash properly with soap and water.
• Do not swallow or take internally.
• Brake fluid can damage vehicle paint. Avoid spilling on painted surfaces.
• In case of spillage on paint, wash immediately with plenty of water.
• Keep the container tightly closed after use.
• Do not use contaminated brake fluid.
• Store in a cool, dry place away from moisture and direct sunlight.
• Use only from a sealed container for best performance.
• Dispose of used brake fluid responsibly as per local guidelines.
• Always follow vehicle manufacturer recommendations before use.
Bulk Orders & Commercial Enquiries for DOT-4
Looking for high-volume purchasing, custom packaging, or dealership opportunities? At Palco Direct, we deliver premium-grade lubricants tailored for automotive, industrial, and commercial sectors with competitive pricing and pan-India logistics support.
- Minimum Order: Flexible MOQ for businesses and distributors.
- Pricing: Specialized discounted slabs based on order volume.
- Support: Dedicated account manager for logistics and documentation.
Click below to connect with our sales team instantly on WhatsApp for a custom quote:
💬 Bulk Enquiry / Get QuotePalco Dot 4 is a premium synthetic brake fluid developed to deliver dependable braking performance in modern vehicles.
Its advanced formulation provides high thermal and chemical stability, helping the brake fluid perform effectively under demanding operating temperatures.
The product offers high dry and wet ERBP, which supports better resistance against vapour lock during service life. Vapour lock can reduce braking efficiency, especially when brake systems
operate under heat and pressure. Palco Dot 4 helps maintain a higher vapour lock point compared to conventional glycol ether-based fluids.
This brake fluid also helps protect hydraulic systems from rust and corrosion. Its balanced additive technology supports long-term brake system cleanliness, better fluid stability, and reliable operation in different driving conditions.
Palco Dot 4 is suitable for users looking for Palco Dot 4 brake fluid, synthetic brake fluid, hydraulic brake fluid, clutch fluid, high boiling brake fluid, or brake fluid for cars, trucks, buses, tractors, and heavy equipment.
1.Refer to the vehicle owner’s manual before selecting brake fluid.
2.Make sure Dot 4 brake fluid is recommended for the vehicle’s hydraulic brake or clutch system.
3.Clean the brake fluid reservoir cap area before opening to avoid contamination.
4.Open the reservoir carefully and fill Palco Dot 4 up to the recommended level.
5.Dot not overfill the reservoir.
6.Avoid mixing with unknown, old, or contaminated brake fluids.
7. After filling, close the cap tightly.
8. Bleed the brake system if required as per service procedure.
9. Check for leaks and proper brake response after service.
For best results, brake fluid replacement should be done by a trained mechanic or service professional. Always follow the manufacturer’s recommended brake fluid change interval
•High boiling synthetic Dot 4 brake fluid
•Provides high thermal and chemical stability
•High dry and wet ERBP for reliable braking performance
•Helps resist moisture-related vapour lock brake failure
•Protects brake system components from rust and corrosion
•Very good low-temperature fluidity
•Suitable for hydraulic brake and clutch systems
•Supports performance under moderate to severe duty conditions
•Designed for modern passenger cars and commercial vehicles
•Suitable for trucks, buses, tractors, and heavy earth moving equipment
•Meets SAE J 1703, FMVSS No. 116 DOT-4, ISO 4925 Class 4, and IS 8654-2019 Type 1 specifications
Palco Dot 4 is recommended for hydraulic brake and clutch systems where Dot 4 brake fluid is specified by the vehicle manufacturer.
It can be used for:
• Passenger cars and modern fuel-efficient vehicles
• Hydraulic brake systems
• Hydraulic clutch systems
• Trucks, buses, and commercial vehicles
• Tractors and agricultural vehicles
• Heavy earth moving equipment
• Vehicles operating under moderate to severe duty conditions
• Brake fluid top-up and replacement service
• Garages, workshops, and automobile service centres
This product is ideal for users looking for Dot 4 brake fluid, synthetic brake fluid, hydraulic brake fluid, high boiling brake fluid, car brake fluid, clutch fluid, or brake fluid for commercial vehicles
• Keep out of reach of children.
• Avoid contact with skin and eyes.
• In case of eye contact, rinse immediately with clean water.
• In case of skin contact, wash properly with soap and water.
• Do not swallow or take internally.
• Brake fluid can damage vehicle paint. Avoid spilling on painted surfaces.
• In case of spillage on paint, wash immediately with plenty of water.
• Keep the container tightly closed after use.
• Do not use contaminated brake fluid.
• Store in a cool, dry place away from moisture and direct sunlight.
• Use only from a sealed container for best performance.
• Dispose of used brake fluid responsibly as per local guidelines.
• Always follow vehicle manufacturer recommendations before use.
Bulk Orders & Commercial Enquiries for DOT-4
Looking for high-volume purchasing, custom packaging, or dealership opportunities? At Palco Direct, we deliver premium-grade lubricants tailored for automotive, industrial, and commercial sectors with competitive pricing and pan-India logistics support.
- Minimum Order: Flexible MOQ for businesses and distributors.
- Pricing: Specialized discounted slabs based on order volume.
- Support: Dedicated account manager for logistics and documentation.
Click below to connect with our sales team instantly on WhatsApp for a custom quote:
💬 Bulk Enquiry / Get QuoteRecommended
Couldn't load pickup availability
Couldn't load pickup availability
Couldn't load pickup availability
Couldn't load pickup availability
Couldn't load pickup availability
Couldn't load pickup availability
Couldn't load pickup availability
Couldn't load pickup availability
Couldn't load pickup availability